 |
 |
 |
|
Panasonic PT-LB2EA Projector
Panasonic employs a number of advanced technologies including a proprietary lamp drive system that help maintain lamp performance . This has resulted in a 5,000-hour lamp replacement cycle. It helps saving operating cost by providing longer usage between lamp replacements.
Momentary power outages or voltage drops can cause the projector to shut down, interrupting the projection. The PT-LB2 series equipped with the Intelligent Power Management function controls the power supply to cope with power fluctuations, to enable continued projection.
Panasonic's Daylight View Basic technology achieves sharp, easy-to-see images by clearly reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms. A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone color and brightness level according to the surrounding illumination.
The noise level is as low as 29-dB. This helps your audience to keep their attention on the discussion or on the screen images during quiet scenes.
The compact body is the size of an A4 file and weighs only about 2.3 kg, while producing a brightness of 2,600 lm. Its handy size and weight make it easy to carry from room to room, or to a client's office for an on-site presentation. It gives you sharp, clear images wherever and whenever you need them.
The ecological design of the PT-LB2 series greatly reduces its environmental impact. In Eco Standby mode, power consumption is only 0.4 W. As examples of other environmental design features, the uncoated cabinet uses no halogenated flame retardants, the lens uses lead-free glass, and an Auto Off Timer switches the projector to Standby mode when no input signal is received for a preset time. The PT-LB2 series also complies with the standards of the RoHS Directive.
|
|
PT-LB2
|
PT-LB1
|
|
Power
supply
|
100240
V AC, 50/60 Hz
|
|
Power
consumption
|
300
W (0.4 W*1 in eco standby mode. 15 W in normal standby mode. 18 W
in normal standby mode when set to audio monitor out and with fan
stopped.)
|
|
Optical
system
|
Dichroic
mirror separation/prism synthesis system
|
|
LCD
panel
|
Panel
size
|
16
mm (0.63") diagonal, 4:3 aspect ratio
|
|
Display
method
|
Transparent
LCD panel (x 3, R/G/B)
|
|
Drive
method
|
Active
matrix
|
|
Pixels
|
786,432
(1,024 x 768) x 3, total of 2,359,296 pixels
|
|
Pixel
configuration
|
Stripe
|
|
Lens
|
Manual
zoom (1:11:1.2),
manual focus,
F 1.641.87, f
18.8022.56 mm
|
Manual
zoom (1:11:1.2),
manual focus,
F 2.002.20, f 19.22
22.68 mm
|
|
Lamp
|
220
W UHM lamp
|
|
Projection
size
|
0.847.62
m (33300 inches) diagonally (4:3 aspect ratio)
|
|
Colors
|
Full
color (16,777,216 colors)
|
|
Brightness*2
|
2,600
lumens
|
2,200
lumens
|
|
Center-to-corner
uniformity ratio*2
|
85%
|
|
Contrast
ratio*2
|
500:1
(full on/full off)
|
|
Resolution
(RGB)*3
|
1,024
x 768 pixels (Input signals that exceed this resolution will
be
converted to 1,024 x 768 pixels.)
|
|
Scanning
frequency
|
RGB
|
Horizontal:
1591 kHz, Vertical: 5085 Hz
|
|
YPBPR
|
480i
(525i): fH 15.75 kHz; fv 60 Hz
576i (625i): fH 15.63 kHz; fv
50 Hz
480p (525p): fH 31.50 kHz; fv 60 Hz
576p (625p): fH
31.25 kHz; fv 50 Hz
720/60p (750p): fH 45.00 kHz; fv 60
Hz
720/50p (750p): fH 37.50 kHz; fv 50 Hz
1080/60i (1125i):
fH 33.75 kHz; fv 60 Hz
1080/50i (1125i): fH 28.13 kHz; fv 50
Hz
1080/60p(1125p): fH 67.50 kHz; fV 60 Hz
1080/50p(1125p):
fH 56.25 kHz; fV 50 Hz
|
|
S-Video/
Video
|
NTSC,
NTSC4.43, PAL-M, PAL60: fH15.75 kHz; fv 60 Hz
PAL, SECAM,
PAL-N: fH15.63 kHz; fv 50 Hz
|
|
Optical
axis shift
|
5:1
(fixed)
|
|
Keystone
correction range
|
Vertical:
approx. ±30°
|
|
On-screen
menu
|
17
languages: English, French, German, Spanish, Italian, Korean,
Russian, Chinese, Japanese, Swedish, Norwegian, Danish,
Portuguese, Polish, Hungarian, Czech, and Thai
|
|
Installation
|
Front/rear,
ceiling/desk (menu selection)
|
|
Built-in
speakers
|
Size:
4 x 2 cm (1-1/16" x 25/32") x 1, oval
|
|
Terminals
|
COMPUTER
(RGB) 1 IN
|
D-sub
HD 15-pin (female) x 1
RGB signal:
G: 0.7 V [p-p] (1.0 V
[p-p] for sync on green signals), 75 ohms, R, B: 0.7 V [p-p], 75
ohms, HD/SYNC, VD: TTL (positive/negative polarity compatible)
YPBPR signal:
Y: 1.0 V [p-p] (including sync signal), 75
ohms, PB, PR: 0.7 V [p-p], 75 ohms
|
|
COMPUTER
(RGB) 2 IN
|
D-sub
HD 15-pin (female) x 1
RGB signal:
G: 0.7 V [p-p] (1.0 V
[p-p] for sync on green signals), 75 ohms, R, B: 0.7 V [p-p], 75
ohms, HD/SYNC, VD: TTL (positive/negative polarity compatible)
YPBPR signal:
Y: 1.0 V [p-p] (including sync signal), 75
ohms, PB, PR: 0.7 V [p-p], 75 ohms
|
|
VIDEO
IN
|
RCA
pin x 1, 1.0 V [p-p], 75 ohms
|
|
S-VIDEO
IN
|
Mini
DIN 4-pin x 1, Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 ohms
|
|
AUDIO
IN
|
M3
(L, R) x 2, 0.5 V [rms]
|
|
VARIABLE
AUDIO OUT
|
M3
(L, R) x 1, 0 2.0 V [rms]
|
|
SERIAL
|
D-sub
9-pin x 1, for external control (RS-232C compliant)
|
|
LAN
|
RJ-45
x 1, compatible with PJLink (class 1), 10BASE-T/100BASE-TX
|
|
Power
cord length
|
2
m (6.6')
|
|
Cabinet
material
|
Moulded
plastic (PC+ABS)
|
|
Dimensions
(W x H x D)*4
|
307
x 69 x 210 mm (12-3/32" x 2-23/32" x 8-9/32")
|
|
Weight*5
|
Approx.
2.3 kg (5.07 lbs.)
|
|
Operating
environment
|
Temperature:
0°40°C (32°104°F) *6
Humidity: 20%80% (no
condensation)
|
|
Supplied
accessories
|
Power
cord, Power cord secure lock, Wireless remote control, Batteries
for remote control ( AAA type for North/South America, R03 type
for Europe/Asia) x2, VGA cable, Carrying bag, Application software
(CD-ROM)
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Brightness (Normal) 2600 ANSI Lumens
- Native resolution XGA
- Weight 2.3 Kg
- Dimensions W x D x H 307 x 210 x 69 mm
- Technology 3LCD
- Vertical Keystone 30 Degrees
|
|
|
|
|
|
|
|
|
.
