Wireless Conversion Kit for Any Projector - STAR BUY

The IOGEAR Wireless USB to VGA Adapter kit instantly allows you to add a high resolution display using Wireless USB Technology. Simply install the driver software, connect the USB adapter to your PC and the VGA adapter to your VGA display, you are ready to extend your desktop to another screen wirelessly.

The kit is ideal for wirelessly displaying the PC content on a remote monitor and minimizing the hassles associated with the installation of PC and flat-panel TV or projector. Enjoy video playing from your PC or browse Internet on your favourite flat-screen TV without the cable limitation.

Requirements
• Microsoft Windows® XP 32-bit (Service Pack 2) or Microsoft Windows® Vista® 32-/64-bit
• 1.6 GHz processor (CPU) with 1GB of system memory (RAM)*
• Flat-panel (LCD / Plasma / DLP) TV display or Projector with VGA (RGB / D-sub 15-pin / PC) or DVI (Does NOT work with DVI-D) port. Does NOT work with CRT tube TV
• Available VGA (Male to Male) Cable
*Suggested system requirement to play online video clips in a “window” – 1.6 Ghz Atom™ with 1GB RAM, 480p video in a “window” – 1.8 Ghz Pentium™ M with 1GB RAM, 720p video in a “window” – 2.8 GHz Pentium™ M with 1 GB RAM, 720p video in “full screen” – 2.8 GHz Core™ 2 Duo with 1GB RAM.

Operating System Support: Microsoft XP 32-bit; Microsoft Vista 32/64-bit PHY Data Rate: 53.3Mbps, 80Mbps, 106.6Mbps, 160Mbps, 200Mbps, 320Mbps, 400Mbps, 480Mbps Operating Range: Up to 30 feet (10 meters) Frequency: 4.224 GHz to 4.752GHz (WiMedia Band Group 1, Band # 3) Number of Channel: 1channel (1 FFI) RF Modulation Type: QPSK/DCM Interface: VGA Video Resolution: Up to UXGA (1600x1200) or WSXGA+ (1680x1050) Video Streaming: Up to 720p (720p only available at resolution 1280x720 or lower) Screen Mode: Extended and Mirror mode Colour Depth: 32-bit True Colour Data Rate: PHY Rate 480 Mbps USB Specification: Certified Wireless USB 1.0; USB 2.0 Connectors: USB mini-B connector used for cable association in wireless mode, and used for wired operation in wired mode Host Selection: Supports up to 3 Hosts, one at a time through Host Selection Switch Security: Highly Secured Wireless Connection (AES 128 bits) Association Mode: Pre-Association and Cable Association; Stores up to 16 Associated Hosts Native Mode: For playback of high resolution video Antenna Type: Omni directional Reset Switch: Used for erasing association history by pressing and holding this button for 10 seconds LEDs: ACT (Activity): Blinking when data is being transferred; Host Status: Showing Association & Connection status; Power On: Solid when power is applied Power Consumption: Wireless USB Adapter: 1.2W; Wireless VGA adapter: 3.3W Max Output Power: -41.3 dBm/MHz Power Adapter: 5V, 2A; 100-240VAC Environment: Humidity: 10-95% RH, Non-condensing ; Operation Temperature: 0 to 50 degree C; Storage Temperature: 0 to 75 degree C POP Information: 10'' Peg Hook; 3, 6'' Peg Hook 2 Unit Dimensions W x H x D (inch): VGA: 3.90 x 1 x 1.85 ; Host adapter: 2.875 x 0.50 x 1.01 Inner Pack W x H x D (inch): 7.52 x 9.50 x 6.61 Inner Pack Qty: 3 Unit Package Dimensions W x H x D (inch): 6.375 x 7.75 x 2.375 Master Carton W x H x D (inch): 15.75 x 19.37 x 13.62 Master Carton Qty: 24 (8 inner packs) Weight (lbs): Master Carton: 44.4; Inner Pack: 5.4; Unit Pack: 1.6; Unit w/accessories: 0.70; Unit: 0.25